FL7412 – Bigbee Steel Buildings
Florida product approval FL7412-R7 for Structural Components – Wall, as listed in ProdApproval’s data as of Sep 29, 2026.
- FL#
- FL7412-R7
- Manufacturer
- Bigbee Steel Buildings
- Code version
- 2023 Florida Building Code
- Status in our data
- Approved
- Products
- 4
Official record on floridabuilding.org →Use on a spec sheet →
Verify approval status on floridabuilding.org before submitting.
Approved products under FL7412-R7
| Approval # | Model | Description | Design pressure | Wind-borne debris | HVHZ | Outside HVHZ |
|---|---|---|---|---|---|---|
| FL7412.1 | 24 Ga. Bigbee Rib II | 24 Ga. Bigbee Rib II Wall Panel over Open framing | +75.0 psf/-62.5 psf | N/A | No | Yes |
| FL7412.2 | 24 Ga. Reverse Run Bigbee Rib II Wall Panel | 24 Ga. Reverse Run Bigbee Rib II Wall Panel over open framing | +54.7 psf/-59.9 psf | N/A | No | Yes |
| FL7412.3 | 26 Ga. Bigbee Rib II | 26 Ga. Bigbee Rib II Wall Panel over Open framing | +57.5 psf/-47.5 psf | N/A | No | Yes |
| FL7412.4 | 26 Ga. Reverse Run Rib II Wall Panel | 26 Ga. Reverse Run Rib II Wall Panel over open framing | +52.1 psf/-52.1 psf | N/A | No | Yes |
Fill a spec sheet with FL7412
On the contractor form, go to the Structural Components – Wall row and type 7412 in the Florida Product Approval # box to fill the row. Walton County users can print a PDF that follows the county’s sheet; see the Walton County Product Approval Specification Sheet guide.