FL704 – American Buildings
Florida product approval FL704-R10 for Roofing Products – Other; Structural Components – Deck-Roof, as listed in ProdApproval’s data as of Sep 29, 2026.
- FL#
- FL704-R10
- Manufacturer
- American Buildings
- Code version
- 2023 Florida Building Code
- Status in our data
- Approved
- Products
- 14
Official record on floridabuilding.org →Use on a spec sheet →
Verify approval status on floridabuilding.org before submitting.
Approved products under FL704-R10
| Approval # | Model | Description | Design pressure | Wind-borne debris | HVHZ | Outside HVHZ |
|---|---|---|---|---|---|---|
| FL704.1 | Loc-Seam 360 | Min 24 ga., max 16" wide standing seam roof panel | +N/A/-157.5 | No | No | Yes |
| FL704.2 | Loc-Seam 90 | Min 24 ga., max 16" wide standing seam roof panel | +N/A/-52.5 | No | No | Yes |
| FL704.3 | R-Panel | Min. 26 ga., 36" wide, through fastened panel over open supports | N/A | N/A | No | Yes |
| FL704.4 | R-Panel | Min. 24 ga., 36" wide, through fastened panel over open supports | +85.8/-169 | Yes | Yes | Yes |
| FL704.5 | SS360 | Min 24 ga., 24" wide standing seam roof panel | +N/A/-52.5 | N/A | No | Yes |
| FL704.6 | SSII | Min 24 ga., 24" wide standing seam roof panel | +N/A/-52.5 | N/A | No | Yes |
| FL704.1 | 12" Loc-Seam | Standing seam metal roofing panel | N/A | N/A | N/A | N/A |
| FL704.2 | 12" Seam-Loc | Standing seam metal roofing panel | N/A | N/A | N/A | N/A |
| FL704.3 | 16" Loc-Seam | Standing seam metal roofing panel | N/A | N/A | N/A | N/A |
| FL704.4 | 16" Seam-Loc | Standing seam metal roofing panel | N/A | N/A | N/A | N/A |
| FL704.5 | 18" Seam-Loc | Standing seam metal roofing panel | N/A | N/A | N/A | N/A |
| FL704.6 | Long Span III | Through fastened metal roof panel | N/A | N/A | N/A | N/A |
| FL704.7 | Standing Seam 360 | Standing seam metal roofing panel | N/A | N/A | N/A | N/A |
| FL704.8 | Standing Seam II | Standing seam metal roofing panel | N/A | N/A | N/A | N/A |
Rows come from FL704-R10, FL704-R0. Where the same product appears under more than one revision, the latest revision is shown.
Fill a spec sheet with FL704
On the contractor form, go to the Roofing Products – Other row and type 704 in the Florida Product Approval # box to fill the row. Walton County users can print a PDF that follows the county’s sheet; see the Walton County Product Approval Specification Sheet guide.