FL35396 – Petersen Aluminum Corp.
Florida product approval FL35396-R1 for Roofing Products – Non-structural Metal RF, as listed in ProdApproval’s data as of Sep 29, 2026.
- FL#
- FL35396-R1
- Manufacturer
- Petersen Aluminum Corp.
- Code version
- 2023 Florida Building Code
- Status in our data
- Approved
- Products
- 16
Official record on floridabuilding.org →Use on a spec sheet →
Verify approval status on floridabuilding.org before submitting.
Approved products under FL35396-R1
| Approval # | Model | Description | Design pressure | Wind-borne debris | HVHZ | Outside HVHZ |
|---|---|---|---|---|---|---|
| FL35396.1 | 2.67" x 7/8" Corrugated Panels | 24 Gage Steel and .032" Aluminum | N/A | No | No | Yes |
| FL35396.2 | 7.2" Rib Panel | 24 Gage Steel and .032" Aluminum | N/A | N/A | No | Yes |
| FL35396.3 | Edge-Loc 1.0 (.032" min.) | .032" Aluminum over 1/2" min. Plywood | +N/A/-52.5 | N/A | No | Yes |
| FL35396.4 | Large Precision Tile Panel: Aluminum | 14.5" wide x .032" (min) aluminum Large Precision Tile Panel | +N/A/-202 | N/A | No | Yes |
| FL35396.5 | Large Precision Tile Panel: Steel | 14.5" wide x 24 ga. (min) steel Large Precision Tile Panel | +N/A/-248 | N/A | No | Yes |
| FL35396.6 | M-36 panel x 36" wide | 24 Ga. Steel (min.) and .032" Aluminum (min.) | N/A | N/A | No | Yes |
| FL35396.7 | Precision Diamond Tile Panel: Aluminum | 7.25" wide x .032" (min) aluminum Precision Diamond Tile Panel | +N/A/-217 | N/A | No | Yes |
| FL35396.8 | Precision Diamond Tile Panel: Steel | 7.25" wide x 24 ga. (min) steel Precision Diamond Tile Panel | +N/A/-243 | N/A | No | Yes |
| FL35396.9 | R-36 panel x 36" wide | 24 Ga. Steel, 22 Ga. Steel, .032" Aluminum, and .040" Aluminum | N/A | N/A | No | Yes |
| FL35396.10 | SNAP-CLAD 16 Oz Copper | Standing Seam Roof Panels 16" wide by 1 3/4" high with Concealed Stainless Steel Clips and Fasteners to Structural Support on a Full Structural Deck | +N/A/-52.5 | N/A | No | Yes |
| FL35396.11 | Snap-On Standing Seam Panel | Standing Seam Roof Panels with Concealed Clips and Fasteners to Structural Support on Full Deck; With Snap-On Batten Cap over Clips and 1" High Legs. | N/A | N/A | No | Yes |
| FL35396.12 | Tite-Loc Plus | .040" Aluminum x 12" wide panel and .040" Aluminum x 16" wide panel | +N/A/-152.1 | N/A | No | Yes |
| FL35396.13 | Tite-Loc Plus | 12" Wide x 0.040" Aluminum Panel over 22 Ga. Metal B-Deck | +N/A/-160.95 | N/A | No | Yes |
| FL35396.14 | Tite-Loc Plus | 12" Wide x 22 Ga. Steel Panels over 22 Ga. Metal B-Deck | +N/A/-186.4 | N/A | No | Yes |
| FL35396.15 | Tite-Loc Plus | 18" Wide x 24 Ga. Steel Panels over 22 Ga. Metal B-Deck | +N/A/-78.5 | N/A | No | Yes |
| FL35396.16 | Tite-Loc Plus | 16" Wide x 0.032" Aluminum Panels over min. 19/32" Plywood Deck | +N/A/-74.1 | N/A | No | Yes |
Fill a spec sheet with FL35396
On the contractor form, go to the Roofing Products – Non-structural Metal RF row and type 35396 in the Florida Product Approval # box to fill the row. Walton County users can print a PDF that follows the county’s sheet; see the Walton County Product Approval Specification Sheet guide.