FL33230 – Petersen Aluminum Corp.
Florida product approval FL33230-R6 for Panel Wall – Siding, as listed in ProdApproval’s data as of Sep 29, 2026.
- FL#
- FL33230-R6
- Manufacturer
- Petersen Aluminum Corp.
- Code version
- 2023 Florida Building Code
- Status in our data
- Approved
- Products
- 16
Official record on floridabuilding.org →Use on a spec sheet →
Verify approval status on floridabuilding.org before submitting.
Approved products under FL33230-R6
| Approval # | Model | Description | Design pressure | Wind-borne debris | HVHZ | Outside HVHZ |
|---|---|---|---|---|---|---|
| FL33230.1 | 7.2 Panel (S1) 2' - 5' Spans | 36" Wide x 24 Ga. (min.) Steel | +N/A/-159.70 | Yes | No | Yes |
| FL33230.2 | 7.2 Panel (S2) 2' - 5' Spans | 36" Wide x .032" (min.) Aluminum | +N/A/-104.0 | N/A | No | Yes |
| FL33230.3 | 7.2 Panel (S3) 1' - 5' Spans | 36" Wide x .050" (min.) Aluminum | +N/A/-192.10 | N/A | No | Yes |
| FL33230.4 | 7.2 Panel (S4) 7 - 10' Spans | 36" Wide x .050" (min.) Aluminum | +N/A/-57.20 | N/A | No | Yes |
| FL33230.5 | Board & Batten (A1) | 12" thru 16" wide x .032" (min.) Aluminum | +100/-84 | N/A | No | Yes |
| FL33230.6 | Board & Batten (S1) | 12" thru 16" wide x 24 Ga. (min.) Steel | +120/-112 | N/A | No | Yes |
| FL33230.7 | Box Rib 1 (A1) | 12" Wide x .032" (min.) Aluminum w/Clip | +N/A/-57.3 | N/A | No | Yes |
| FL33230.8 | Box Rib 1 (A2) | 12" Wide x 24 Ga. (min.) Steel w/Clip | +N/A/-80.6 | N/A | No | Yes |
| FL33230.9 | Box Rib 2 (A3) | 12" Wide x .032" (min.) Aluminum w/Clip | +N/A/-101.4 | N/A | No | Yes |
| FL33230.10 | Box Rib 2 (A4) | 12" Wide x 24 Ga. (min.) Steel w/Clip | +N/A/-88.5 | N/A | No | Yes |
| FL33230.11 | Box Rib 3 (A5) | 12" Wide x .032" (min.) Aluminum w/Clip | +N/A/-75.4 | N/A | No | Yes |
| FL33230.12 | Box Rib 3 (A6) | 12" Wide x 24 Ga. (min.) Steel w/Clip | +N/A/-78.0 | N/A | No | Yes |
| FL33230.13 | Box Rib 4 (A7) | 12" Wide x .032" (min.) Aluminum w/Clip | +N/A/-85.6 | N/A | No | Yes |
| FL33230.14 | Box Rib 4 (A8) | 12" Wide x 24 Ga. (min.) Steel w/Clip | +N/A/-105.2 | N/A | No | Yes |
| FL33230.15 | Modular AL (050) | 3" deep x 24" wide x 0.050" (min.) Aluminum | +N/A/-57.2 | N/A | No | Yes |
| FL33230.16 | Modular AL (080) | 3" deep x 30" wide x 0.080" (min.) Aluminum | +N/A/-57.2 | N/A | No | Yes |
Fill a spec sheet with FL33230
On the contractor form, go to the Panel Wall – Siding row and type 33230 in the Florida Product Approval # box to fill the row. Walton County users can print a PDF that follows the county’s sheet; see the Walton County Product Approval Specification Sheet guide.