FL24510 – Reed Metal, Inc.
Florida product approval FL24510-R1 for Structural Components – Deck-Roof, as listed in ProdApproval’s data as of Sep 29, 2026.
- FL#
- FL24510-R1
- Manufacturer
- Reed Metal, Inc.
- Code version
- 2020 Florida Building Code
- Status in our data
- Approved
- Products
- 4
Official record on floridabuilding.org →Use on a spec sheet →
Verify approval status on floridabuilding.org before submitting.
Approved products under FL24510-R1
| Approval # | Model | Description | Design pressure | Wind-borne debris | HVHZ | Outside HVHZ |
|---|---|---|---|---|---|---|
| FL24510.1 | PBR Panel - Anchor Pattern A | Through-fastened structural metal roof panels installed over minimum 16 gauge steel purlins (spaced supports) for use in new construction and re-roofing applications. | +49.4/-41.6 | N/A | No | Yes |
| FL24510.2 | PBR Panel - Anchor Pattern B | Through-fastened structural metal roof panels installed over minimum 16 gauge steel purlins (spaced supports) for use in new construction and re-roofing applications. | +156.0/-122.2 | No | No | Yes |
| FL24510.3 | Secure-Seam - Anchor Pattern A | Secure-Seam standing seam minimum 26 gauge structural metal roof panels, nominal 14" coverage, installed over minimum 16 gauge purlins for use in new construction applications. | +N/A/-26.0 | No | No | Yes |
| FL24510.4 | Secure-Seam - Anchor Pattern B | Secure-Seam standing seam minimum 26 gauge structural metal roof panels, nominal 14" coverage, installed over minimum 16 gauge purlins for use in new construction applications. | +N/A/--88.4 | No | No | Yes |
Fill a spec sheet with FL24510
On the contractor form, go to the Structural Components – Deck-Roof row and type 24510 in the Florida Product Approval # box to fill the row. Walton County users can print a PDF that follows the county’s sheet; see the Walton County Product Approval Specification Sheet guide.