FL17025 – Berridge Manufacturing Co.
Florida product approval FL17025-R2 for Roofing Products – Non-structural Metal RF, as listed in ProdApproval’s data as of Sep 29, 2026.
- FL#
- FL17025-R2
- Manufacturer
- Berridge Manufacturing Co.
- Code version
- 2023 Florida Building Code
- Status in our data
- Approved
- Products
- 3
Official record on floridabuilding.org →Use on a spec sheet →
Verify approval status on floridabuilding.org before submitting.
Approved products under FL17025-R2
| Approval # | Model | Description | Design pressure | Wind-borne debris | HVHZ | Outside HVHZ |
|---|---|---|---|---|---|---|
| FL17025.1 | 01 - "Tee-Panel" with Snap-On Seam | 24 Gauge Steel Roof Panel, 18-1/4" or 12-3/4" Width, Attached to Wood Deck with Berridge High Seam Tee-Clips & Snap-on Seam | +See/-52.5 | No | No | Yes |
| FL17025.2 | 02 - "High Seam Tee-Panel" with Snap-On Seam | 24 Gauge Steel Roof Panel, 18-1/4" Width, Attached to Steel Deck with Berridge High Seam Tee-Clips & Snap-on Seam | +See/-52.5 | No | No | Yes |
| FL17025.3 | 03 - "Tee-Panel" with Snap-On Seam | 24 Gauge Steel, 12-3/4" Width, Attached to Steel Deck with Berridge Tee-Clip | +See/-52.5 | No | No | Yes |
Fill a spec sheet with FL17025
On the contractor form, go to the Roofing Products – Non-structural Metal RF row and type 17025 in the Florida Product Approval # box to fill the row. Walton County users can print a PDF that follows the county’s sheet; see the Walton County Product Approval Specification Sheet guide.