FL11847 – Metal Roof Factory
Florida product approval FL11847-R6 for Roofing Products – Non-structural Metal RF, as listed in ProdApproval’s data as of Sep 29, 2026.
- FL#
- FL11847-R6
- Manufacturer
- Metal Roof Factory
- Code version
- 2020 Florida Building Code
- Status in our data
- Approved
- Products
- 6
Official record on floridabuilding.org →Use on a spec sheet →
Verify approval status on floridabuilding.org before submitting.
Approved products under FL11847-R6
| Approval # | Model | Description | Design pressure | Wind-borne debris | HVHZ | Outside HVHZ |
|---|---|---|---|---|---|---|
| FL11847.1 | 1.0 Snap Lock | 1.0 Snap Lock 24GA over 19/32" or greater APA rated plywood | +N/A/-131 | N/A | Yes | Yes |
| FL11847.2 | 5V Crimp | 26 Ga. 5V Crimp Roof Panel over APA Rated Plywood | +N/A/-156.5PSF | N/A | Yes | Yes |
| FL11847.3 | Mechanical Lock | 1 1/2" Mechanical Lock 24 Ga. 16" wide over APA Rated Plywood | +N/A/-123.5PSF | N/A | Yes | Yes |
| FL11847.4 | Nail Strip | 1" Nailstrip 24 Ga. 16" Wide over 15/32" APA Plywood | +N/A/-153.5PSF | N/A | No | Yes |
| FL11847.5 | Rib | 26 Ga. Rib over 15/32" APA Plywood | +N/A/-146.0PSF | N/A | No | Yes |
| FL11847.6 | Snap Lock | 1 1/2" Snap Lock 24 Ga. and 0.032 AL Snap Lock over APA Rated Plywood | +N/A/-116.0PSF | N/A | Yes | Yes |
Fill a spec sheet with FL11847
On the contractor form, go to the Roofing Products – Non-structural Metal RF row and type 11847 in the Florida Product Approval # box to fill the row. Walton County users can print a PDF that follows the county’s sheet; see the Walton County Product Approval Specification Sheet guide.