FL11819 – MBCI
Florida product approval FL11819-R5 for Structural Components – Deck-Roof, as listed in ProdApproval’s data as of Sep 29, 2026.
- FL#
- FL11819-R5
- Manufacturer
- MBCI
- Code version
- 2020 Florida Building Code
- Status in our data
- Approved
- Products
- 9
Official record on floridabuilding.org →Use on a spec sheet →
Verify approval status on floridabuilding.org before submitting.
Approved products under FL11819-R5
| Approval # | Model | Description | Design pressure | Wind-borne debris | HVHZ | Outside HVHZ |
|---|---|---|---|---|---|---|
| FL11819.1 | 7.2 Panel | Min. 26 ga., 36" wide through fastened roof panel | +N/A/-52.5 | N/A | No | Yes |
| FL11819.2 | Battenlok HS | Min. 24 ga., max. 16" wide standing seam roof panel | +N/A/-71.2 | N/A | No | Yes |
| FL11819.3 | DoubleLok | Min. 24 ga., 12", 18" or 24" wide standing seam roof panel | +N/A/-220 | N/A | No | Yes |
| FL11819.4 | LokSeam | Min. 24 ga., max. 16" wide snap lock standing seam roof panel | +N/A/-40.0 | N/A | No | Yes |
| FL11819.5 | PBR Panel | Min. 29 ga., 36" wide through fastened roof panel | +N/A/-142.5 | N/A | No | Yes |
| FL11819.6 | PBU Panel | Min. 26 ga., 36" wide through fastened roof panel | +N/A/-52.5 | N/A | No | Yes |
| FL11819.7 | Retro-R Panel | Min 26 ga., 36" wide through fastened roof panel. Retro-R® is a non-structural panel that can be installed over an existing PBR or R panel (min 29 ga.) | +N/A/-130 | N/A | No | Yes |
| FL11819.8 | SuperLok | 24 or 22 ga., max. 16" wide standing seam roof panel | +N/A/-130.0 | N/A | No | Yes |
| FL11819.9 | UltraDek | Min. 24 ga., max 24" wide snap lock standing seam roof panel | +N/A/-50.0 | N/A | No | Yes |
Fill a spec sheet with FL11819
On the contractor form, go to the Structural Components – Deck-Roof row and type 11819 in the Florida Product Approval # box to fill the row. Walton County users can print a PDF that follows the county’s sheet; see the Walton County Product Approval Specification Sheet guide.