FL11815 – Aztec Steel Buildings Corp.
Florida product approval FL11815-R6 for Structural Components – Wall, as listed in ProdApproval’s data as of Sep 29, 2026.
- FL#
- FL11815-R6
- Manufacturer
- Aztec Steel Buildings Corp.
- Code version
- 2023 Florida Building Code
- Status in our data
- Approved
- Products
- 4
Official record on floridabuilding.org →Use on a spec sheet →
Verify approval status on floridabuilding.org before submitting.
Approved products under FL11815-R6
| Approval # | Model | Description | Design pressure | Wind-borne debris | HVHZ | Outside HVHZ |
|---|---|---|---|---|---|---|
| FL11815.1 | 1-End Wall Panel 24 x 3.5 - 18 | End Wall Panel for Quonset Hut Structures, 18 Gauge Minimum | +49.2/-61.5 | No | No | Yes |
| FL11815.2 | 2-End Wall Panel 24 x 3.5 - 20 | End Wall Panel for Quonset Hut Structures, 20 Gauge Minimum | +40.8/-51.0 | No | No | Yes |
| FL11815.3 | 3-End Wall Panel 24 x 3.5 - 22 | End Wall Panel for Quonset Hut Structures, 22 Gauge Minimum | +23.4/-29.2 | No | No | Yes |
| FL11815.4 | 3-End Wall Panel 24 x 3.5 - 23 | End Wall Panel for Quonset Hut Structures, 23 Gauge Minimum | +13/-16 | No | No | Yes |
Fill a spec sheet with FL11815
On the contractor form, go to the Structural Components – Wall row and type 11815 in the Florida Product Approval # box to fill the row. Walton County users can print a PDF that follows the county’s sheet; see the Walton County Product Approval Specification Sheet guide.