FL11751 – Englert Inc.
Florida product approval FL11751-R9 for Roofing Products – Non-structural Metal RF, as listed in ProdApproval’s data as of Sep 29, 2026.
- FL#
- FL11751-R9
- Manufacturer
- Englert Inc.
- Code version
- 2023 Florida Building Code
- Status in our data
- Approved
- Products
- 10
Official record on floridabuilding.org →Use on a spec sheet →
Verify approval status on floridabuilding.org before submitting.
Approved products under FL11751-R9
| Approval # | Model | Description | Design pressure | Wind-borne debris | HVHZ | Outside HVHZ |
|---|---|---|---|---|---|---|
| FL11751.1 | 01 - Englert "Series 2000" | Roof Panel - 24 Gauge Steel, 18" Width, Attached to Plywood Deck | +N/A/-165max | No | No | Yes |
| FL11751.2 | 02 - Englert "Series 2000" | Roof Panel - 0.032" Aluminum, 18" Width, Attached to Wood Deck | +N/A/-180 max. | No | No | Yes |
| FL11751.3 | 03 - Englert "Series 2000" | Roof Panel - 24 Gauge Steel, 18" Width or 14" Width, Attached to Steel Deck | +N/A/-144 max. | No | No | Yes |
| FL11751.4 | 04 - Englert "Series 2000" | Roof Panel - 0.040" Aluminum, 18" Width, Attached to Wood Deck | +N/A/-150 max. | No | No | Yes |
| FL11751.5 | 05 - Englert "Series 2000" | Roof Panel - 0.032" Aluminum, 18" Width, Attached to Steel Deck | +N/A/-157.5max | No | No | Yes |
| FL11751.6 | 06 - Englert "Series 2000" (R9) | Roof Panel - 24 Gauge Steel, 18" Width, Attached to Plywood Deck | +N/A/-165max | No | Yes | Yes |
| FL11751.7 | 07 - Englert "Series 2000" (R9) | Roof Panel - 0.032" Aluminum, 18" Width, Attached to Wood Deck | +N/A/-180 max | No | Yes | Yes |
| FL11751.8 | 08 - Englert "Series 2000" (R9) | Roof Panel - 24 Gauge Steel, 18" Width or 14" Width, Attached to Steel Deck | +N/A/-144 max | No | Yes | Yes |
| FL11751.9 | 09 - Englert "Series 2000" (R9) | Roof Panel - 0.040" Aluminum, 18" Width, Attached to Wood Deck | +N/A/-150 max | No | Yes | Yes |
| FL11751.10 | 10 - Englert "Series 2000" (R9) | Roof Panel - 0.032" Aluminum, 18" Width, Attached to Steel Deck | +N/A/-157.5max | No | Yes | Yes |
Fill a spec sheet with FL11751
On the contractor form, go to the Roofing Products – Non-structural Metal RF row and type 11751 in the Florida Product Approval # box to fill the row. Walton County users can print a PDF that follows the county’s sheet; see the Walton County Product Approval Specification Sheet guide.